Our investment in exceptional equipment and experienced, carefully-trained operators allows us to deliver nonferrous and specialty alloys to mill certified flatness precisely as you need them-so you get exactly the size sheet or flat strip you need to minimize scrap.
| Thickness Capability |
.010" to .125" |
| Minimum Width |
.250" |
| Maximum Width |
15" |
| Length |
14" to 144" |
| Length Tolerance |
From +/-.375" to +.250"/-.000" |
| Straight Line Precision Sawing |
Thickness Range (in inches) |
Sawing Tolerances(in inches) |
| Aluminum |
.125 to 2.000 |
+/-.005 |
| Aluminum |
over 2.000 to 6.000 |
+/-.010 |
| Straight Line Standard Sawing |
Thickness Range (in inches) |
Sawing Tolerances(in inches) |
| Aluminum |
.125 to 6.000 |
+.064/ -.000 |
| Non Precision Sawing |
Thickness Range (in inches) |
Sawing Tolerances(in inches) |
| Aluminum |
6.5 to 9.000 |
+.250,-.000 |
| Aluminum |
over 9.000 to 14.000 |
+.500,-0.000 |
| Aluminum |
over 14.000 to 20.000 |
+1.000,-.000 |
| Straight Line Standard Sawing |
Thickness Range (in inches) |
Sawing Tolerances(in inches) |
| Aluminum |
.032 to 8.000 |
(ID)+-.000,-.125
(OD)+.125,-.000
|
Minimum ID -- 2.000 inches, Minimum OD -- 3.000 inches, Maximum OD -- 56.000 inches
Coil and Strip